Are you struggling with your epoxy floors being too slippery? It can be quite the problem, especially if you have a business that sees a lot of foot traffic. The last thing you want is for someone to slip and fall because of your flooring. In this article, we'll discuss the fundamentals of epoxy and additive coatings to help you make your epoxy coating non-slip.
Epoxy is a thermosetting plastic material that is frequently used as a coating for floors. It is extremely durable and provides a high-gloss finish. However, one of the drawbacks of epoxy flooring is that it can be slightly slippery when wet. This can pose a safety hazard, so many business owners are looking for ways to make their epoxy flooring non-slip.
An epoxy additive is a material that is added to the epoxy resin in order to change its properties. There are a variety of epoxy additives on the market, each with its own unique purpose. For our purposes, we're interested in epoxy additives that will make the flooring non-slip.
There are several different types of non-slip additives that can be used in epoxy flooring. The most common type is silica sand. Silica sand is a very fine type of sand that can be scattered across the floor before the epoxy coating is applied. As the epoxy dries, the silica sand will become embedded in the coating and will provide a sandpaper-like surface that will increase the coefficient of friction.
Another type of non-slip additive is aggregate. Aggregate is a material that is added to the epoxy resin before it is applied to the floor. Common types of aggregate include aluminum oxide, silicon carbide, and quartz. These materials are very hard and will provide a rough surface that will increase the coefficient of friction.
A third type of non-slip additive is a polymer. Polymers are long chain molecules that can be added to the epoxy resin in order to change its properties. There are a variety of polymers that can be used, but the most common type is polyurethane. Polyurethane is a plastic that is frequently used in coatings and adhesives. It is very flexible and has a high coefficient of friction.
There are two ways to add a non-slip additive to epoxy flooring. The first way is to mix the additive into the epoxy resin before it is applied to the floor. This can be done by adding the additive directly to the epoxy bucket or by using a mixing paddle. The second way is to sprinkle the additive onto the floor before the epoxy is applied. This method is often used with silica sand because it can be difficult to evenly distribute the sand if it is mixed into the epoxy.
The best non-slip additive for epoxy flooring is polyurethane. Polyurethane has a high coefficient of friction and is very flexible. It is also easy to add to the epoxy resin. You can simply mix it into the epoxy before you apply it to the floor.
Q: How long does it take for the epoxy to dry?
A: The epoxy will take 24-48 hours to fully cure. During this time, it is important not to walk on the floor or allow any traffic.
Q: Can I use a power washer to clean my floor?
A: No. Power washing can damage the epoxy coating and potentially cause it to fail.
Q: What if I accidentally spill something on my floor?
A: If you spill something on your floor, it is important to clean it up as soon as possible. Use a mild soap and water solution to avoid damaging the coating.
Q: Can I use furniture on my floor?
A: Yes. However, it is important to use felt pads or another type of soft material under the furniture legs to avoid scratching the floor.
Q: Can I wax my floor?
A: No. Wax can damage the epoxy coating and potentially cause it to fail.
Q: How long will my floor last?
A: With proper care, your floor should last for many years. On average, epoxy flooring will last 10-15 years.
Q: Do I need to do anything to prepare my floor before I apply the epoxy?
A: Yes. It is important to clean your floor and remove any dirt, dust, or oil before you apply the epoxy. Failure to do this can result in a poor bond between the epoxy and the floor.
If you're looking for ways to make your epoxy floors non-slip, there are a few things you can do. The most common method is to add a non-slip additive to the epoxy resin. The most common type of additive is silica sand, but other options include aggregate and polymer. Polyurethane is the best type of additive because it is easy to mix into the epoxy and has a high coefficient of friction.
Call Us Now: 714-409-1137